Commercial Kitchen Fit-Out Cost per Square Metre UK: 2026 Buyer Benchmarks

Commercial Kitchen Fit-Out Cost per Square Metre UK: 2026 Buyer Benchmarks

If you are pricing a new kitchen or major refurbishment, the fastest way to sense-check quotes is to benchmark by area. In 2026, the commercial kitchen fit-out cost per square metre UK typically lands between £2,200 and £5,200 per m² (roughly £204 to £483 per ft²) depending on specification, extraction complexity, and the condition of the existing unit.

That range is wide for a reason: two kitchens with the same floor area can have very different utility loads, ventilation demands, and equipment requirements. This guide gives practical UK benchmarks you can use early, then shows how to tighten the budget before you commit.

2026 benchmark snapshot (quick reference)

Featured snippet answer: For most UK hospitality projects in 2026, a realistic commercial kitchen fit-out cost per square metre UK benchmark is £2,200 to £5,200 per m² excluding VAT, equivalent to £204 to £483 per ft². Lower ranges usually reflect lighter-duty kitchens and simpler services; upper ranges typically include higher-output cooklines, major extraction, and significant M&E upgrades.

  • Entry spec: £2,200-£2,900 per m² (£204-£269 per ft²)
  • Mid spec: £2,900-£3,900 per m² (£269-£362 per ft²)
  • High-output / premium spec: £3,900-£5,200+ per m² (£362-£483+ per ft²)

Use these as budgeting benchmarks, not tender totals. Final figures depend on survey findings, programme constraints, and service capacity.

Cost by kitchen size band: per m² and per ft²

The restaurant kitchen fit out cost per m2 usually falls as floor area grows, but only up to a point. Smaller kitchens tend to carry higher rates because extraction, fire suppression, controls, and commissioning still have fixed costs.

Small kitchens (20-40 m²)

  • Typical rate: £2,800-£5,200 per m² (£260-£483 per ft²)
  • Common profile: takeaway units, compact high-street sites, dark kitchens
  • Why higher: fixed compliance and services costs spread across less area

Medium kitchens (40-80 m²)

  • Typical rate: £2,500-£4,300 per m² (£232-£399 per ft²)
  • Common profile: full-service restaurants, pubs with food-led offers, hotel back-of-house upgrades
  • Watch-outs: electrical capacity, grease management, and duct routing

Larger kitchens (80-150+ m²)

  • Typical rate: £2,200-£3,800 per m² (£204-£353 per ft²)
  • Common profile: destination venues, central production kitchens, mixed-service sites
  • Cost drivers: multiple cooklines, larger air volumes, more complex zoning

If you are comparing quotes, ask each contractor to confirm what is included in their commercial kitchen installation price per m2 assumptions. One quote may include full builders’ works and final commissioning, while another may not.

Where the budget usually goes

For planning purposes, these splits are typical in commercial kitchen fit out cost UK projects:

  • Equipment supply: 30-45%
  • Extraction and ventilation: 15-25%
  • M&E services (power, gas, water, drainage): 15-25%
  • Builders’ works, finishes, and hygiene surfaces: 8-15%
  • Design, project management, commissioning, handover: 5-10%

These ranges explain why two similar floorplates can price differently. A menu with heavy frying and chargrill demand can push extraction and make-up air costs far above average. Likewise, older units often need electrical upgrades that are invisible at first viewing.

Specification bands: what changes the £/m² rate

Entry spec (£2,200-£2,900 per m²)

Usually refurb-led, selective equipment replacement, straightforward extract path, and minimal structural intervention. Suitable where covers are moderate and menu complexity is controlled.

Mid spec (£2,900-£3,900 per m²)

Balanced replacement across cookline, prep, wash-up and cold storage, with improved workflow and stronger utility planning. This is where many independent restaurant and pub projects land.

High-output spec (£3,900-£5,200+ per m²)

High-throughput operations, premium kit, extensive ventilation, enhanced controls, and larger infrastructure upgrades. Typical in dense urban sites, premium concepts, and performance-led kitchens where service speed is critical.

When reviewing commercial kitchen equipment and installation costs, focus on operational output, not just unit price. A cheaper appliance mix that slows service can cost more in labour and lost covers over time.

UK cost drivers buyers often miss before sign-off

  • Extraction route and discharge point: long duct runs, riser constraints, and acoustic treatment can materially alter costs.
  • Incoming services capacity: inadequate electrical supply or gas pressure can trigger major upgrade works.
  • Fire strategy integration: suppression, interlocks, and alarm interfaces are often under-scoped.
  • Drainage and falls: below-slab interventions or pump solutions can increase programme risk.
  • Access and logistics: city-centre delivery windows, upper-floor plant placement, and crane lifts affect labour and time.
  • Phased works in live venues: out-of-hours installation to reduce downtime usually carries premium labour rates.

For a deeper extraction-focused view, see commercial kitchen extraction costs and hidden extras.

Per ft² checks for landlords, agents and finance teams

Some stakeholders still budget in square feet. As a quick cross-check, fit out cost per square foot commercial kitchen UK commonly falls between £204 and £483 per ft², with many mid-spec projects clustering around £270-£360 per ft².

This is also useful when comparing wider UK restaurant refurbishment kitchen costs where front-of-house and back-of-house budgets are presented separately. Keep kitchen costs ring-fenced so core production capacity is not squeezed by front-end finishes.

How to use a commercial kitchen budget calculator UK owners can trust

A useful commercial kitchen budget calculator UK method is to combine area benchmarks with three project-specific multipliers:

  • Menu intensity factor: light, medium, heavy-duty production
  • Site condition factor: modern shell, partial refurb, ageing infrastructure
  • Programme factor: standard timeline vs accelerated / phased works

Example approach: start at a mid-rate of £3,300 per m², then adjust up or down based on these factors before seeking formal quotations. This produces a better planning number than using area alone.

Common quote comparison mistakes

  • Comparing totals without checking what each scope excludes (commissioning, making good, testing, certification).
  • Ignoring downtime costs while chasing a lower capital number.
  • Underestimating the effect of extraction complexity on programme and approvals.
  • Accepting equipment substitutions that reduce throughput or increase maintenance exposure.
  • Proceeding without a survey-led services check before final commitment.

If you are early in planning, this broader guide on commercial kitchen installation cost in the UK can help frame full lifecycle thinking.

When a turn-key contractor improves cost control

For many operators, using one contractor for design, equipment supply, and installation reduces risk in both cost and programme. A turn-key model can improve coordination between layout, extraction, and M&E, which is where budget drift often starts.

Norgroup supports this route through commercial kitchen installation, catering equipment supply, and planned aftercare via service and maintenance contracts. That continuity matters when you are protecting opening dates and future uptime.

Final takeaway for 2026 buyers

The right benchmark is not one number; it is a defensible range tied to your menu, covers, and unit condition. Use £2,200-£5,200 per m² as your working envelope, then narrow it quickly with a survey-led scope before signing supplier commitments.

Need a sharper number for your site? Request a site survey and a line-by-line kitchen cost plan from Norgroup. You will get a practical breakdown based on your concept, expected throughput, and property constraints, so you can approve budget with confidence and avoid late-stage surprises.

0 comments

Leave a comment

Please note, comments need to be approved before they are published.